Compressing Wisely with IBM Spectrum Virtualize

Brett

By Brett Allison

 

Compressing Wisely - CompressionCompression of data in an IBM SVC Spectrum Virtualize environment may be a good way to gain back capacity, but there can be hidden performance problems if compressible workloads are not first identified. Visualizing these workloads is key to determining when and where to successfully use compression. In this blog, we help you with identifying the right workloads so that you can achieve capacity savings in your IBM Spectrum Virtualize environments without compromising performance.

Today, all vendors have compression capabilities built into their hardware. The advantage of compression is that you need less real capacity to service the needs of your users. Compression reduces your managed capacity, directly reducing your storage costs.

Continue reading

How to Diagnose IBM SVC/Storwize V7000 (Spectrum Virtualize) Replication Performance Issues: Part 2 Diagnostics

Brett

By Brett Allison

 

In part 1 of this blog series we talked about how to select your SVC/V7000, replication technology that matches your business requirements, or more likely, your budget.

Now we need to think about how you can monitor and diagnose SVC/V7000 performance issues that may be caused by replication. I run into SVC/V7000 replication issues quite frequently, and have found that not all monitoring and diagnostic tools provide a comprehensive picture of SVC/V7000 replication. Further complicating matters, the nature of the technology you have selected will influence expectations and approach to problem determination.

Continue reading

How to Choose the Best IBM SVC/Storwize V7000 (Spectrum Virtualize) Replication Technology: Part I Introduction

Brett

By Brett Allison

Disaster Recovery Plan

Choosing the wrong V7000/SVC replication technology can put your entire availability strategy at risk.

For most customers, there seems to be a bit of a mystery in how replication works. On the surface, it is simple. Data is written to a primary copy and either synchronously or asynchronously copied to a secondary location with the expectation that a loss of data at the primary site would result in minimal data loss and a very minimal recovery effort.

There are several types of replication, and each type has its nuances. Each of these technologies should be evaluated in light of the following business requirements:

1. Recovery Point Objective (RPO): This is the amount of data loss expressed in time units (typically minutes) that you will lose should there be a failover to the secondary site.   Continue reading

Four Steps You Should Take to Identify, Resolve and Prevent IBM SVC Front-End Imbalance

Brett

By Brett Allison

 

Did you know you could be at risk of a performance meltdown while you still have plenty of front-end bandwidth?^C4031C5083E777C98FFA92FFCF04342FF4F4D55DBADF9C7952^pimgpsh_thumbnail_win_distr

An imbalanced front-end can cripple the performance of your IBM SVC system. An imbalanced front-end is another way of saying that too much workload is handled by too few ports. This leads to buffer credit shortages, increases in latency, and low throughput. It is very easy to create imbalances within an IBM SVC system’s front-end, and it can be fairly difficult to see it happening without the proper tools. Continue reading